amazon black friday 2020 -
Share to your friends
Black Friday ShopAdvertisement

You probably have by no means refinished a classic steel glider, I can inform you that it requires some work and a bit persistence and you’ll find yourself with an attractive glider.

Earlier than we start, let me inform you that you need to work in a secure method, use correct air flow, and all the time use security gear together with protecting clothes and an acceptable masks. You’re accountable for your personal security.

Eradicating The Paint

To do a extremely good job, all paint have to be faraway from the steel. An previous outside glider will normally have been repainted a number of instances, so you’ll have a number of coats of paint to take away. There are a number of strategies you need to use:

1) Paint Stripper is one methodology. Totally different manufacturers have totally different formulation so you will need to comply with the directions on the can. Mainly, paint stripper will soften the paint so you possibly can scrape it off. You have to be ready with a receptacle for the soften paint. This may be messy however if you’re organized and work in a sample you shouldn’t have a lot hassle. Make additional functions as essential to positive you take away all of the paint. Use additional steps as instructed within the product instructions on the can. Eliminate the eliminated paint based on native waste disposal pointers.

2) Sanding is one other methodology. Utilizing a grinding sander and coarse sand paper, use gentle stress and sand away the paint. Utilizing gentle stress is essential as a result of you possibly can sand by means of the steel, particularly the underside apron space. Rust might need taken maintain so take it very straightforward. Sand all the glider as a lot as potential.

You will be unable to get into the corners and crevasses with a normal sander pad. So, if you end up completed with the usual pad, change to a sanding wheel which can can help you get into crevasses. If you find yourself full, mud off the glider very properly utilizing some mineral spirits.


It ought to take about 10 cans of spray grey primer. Utilizing a always transferring movement, spray all the glider with the primer. Make sure that all areas are properly lined.

Make sure that it dries fully earlier than you proceed. This can normally take an hour, longer when you have very excessive humidity.


A classic steel glider will look finest with a two-tone paint job. You’ll need:

  • 2 rolls of masking tape,
  • About 10 cans of the first shade spray paint (the outer areas),
  • About 5 cans of secondary shade spray paint (the inside areas), and
  • About four cans of clear spray coating.

Masks off the inside areas of the outside glider, after which spray paint the outer areas with the first shade. Take away the masking tape instantly to stop chipping.

Enable the paint to fully dry.

Masks off the outer areas permitting a bit lap over, after which spray paint the inside areas with the secondary shade. Take away the masking tape instantly to stop chipping.

Enable the paint to fully dry.

Then spray the clear coating on all the glider. Use three coats of clear coating to provide a wealthy look.

Enable the paint to fully dry.

You are actually completed. You now have an attractive newly painted steel porch glider.


Source by Aleister Holmes

Leave a Comment

Black Friday 2020 Best Buy 2020